|
POLISHING BARREL WITH VACUME (PB-700A)
PB-700A Polishing
Barrel is having automatic cycle for polishing and dust removal. The
machine is having a loading capacity of 700Kgs. It is equipped with
three-stage dust collection system. After the polishing cycle is over,
dust collector sucks the dust from the barrel. While collecting the
dust, it also separates the Nail chips, Heavy dust particles and Fine
dust particles leaving only clean and polished nails in the barrel. All
these separated particles go in their respective bins for easy disposal
thus making your plant even more environment friendly. The Fine dust
particle collection is having filter of 15 micron to ensure that no
dust particle bigger than 15 micron is discharged in the atmosphere.
This is very important for environmental safety. The discharge of nail
is located at 780mm above the floor level to conveniently unload the
nails in large bins. The PB-700A has only three Push Buttons making
operation, user friendly. The operation is as easy as pressing a single
button START and rest of the chorus are done automatically in cycle.
The Machine stops after the cycle is completed thus by leaving the
operator free to handle other important work. Even with this simplicity
the PB-700As flexibility is not compromised, operator can set the
polishing time and dust collecting time according to individual plants
need and the quality of polish required.
TECHNICAL SPECIFICATION:
Loading Capacity (kgs.) : 700
Power:
Main Motor (kW / hp) : 5.5 / 7.5
Dust Collection Motor (kW / hp) : 1.5 / 2
Floor Space
Polishing Barrel (mm) : 2150mm x 1210mm
Dust Collection System (mm) : 1550mm x 900mm
Nett. Weight (kgs.) : 2100
|
